Polynomial Long Division and Synthetic Division: Steps, Remainders, and Practice Sets
algebrapolynomialssynthetic divisionlong divisionremaindersprecalculus

Polynomial Long Division and Synthetic Division: Steps, Remainders, and Practice Sets

EEquation Study Hub Editorial Team
2026-11-21
7 min read

Learn polynomial long division and synthetic division step by step, including missing terms, remainders, checks, examples, and practice.

Polynomial division becomes manageable when you treat it as a repeatable process rather than a collection of isolated tricks. This guide explains how to arrange terms, choose between polynomial long division and synthetic division, handle missing powers, interpret remainders, and verify each result. It also includes worked examples and practice sets for building reliable algebra and precalculus skills.

Overview

Dividing polynomials follows the same basic idea as dividing whole numbers: determine one part of the quotient, multiply, subtract, and continue until the remaining expression has a lower degree than the divisor.

The general result is written as:

Dividend = (Divisor)(Quotient) + Remainder

For example, if f(x) is divided by d(x), then:

f(x) = d(x)q(x) + r(x)

The remainder must have a lower degree than the divisor. When the divisor is linear, such as x - c, the remainder is a constant. A remainder of zero means the divisor is a factor of the dividend.

Long division versus synthetic division

MethodBest used whenWhat you need to remember
Polynomial long divisionThe divisor has any polynomial formArrange terms by descending powers and repeat divide, multiply, subtract, and bring down.
Synthetic divisionThe divisor is linear and written as x - cUse the number c in a compact coefficient table.

Long division is the more general method. Synthetic division is usually faster for a linear divisor, especially when testing possible factors or evaluating a polynomial. If the divisor is x + 3, rewrite it as x - (-3); the synthetic number is -3, not 3.

How to estimate

In polynomial division, “estimating” means predicting the quotient’s degree and leading term before completing the arithmetic. This gives you a way to catch errors early.

  1. Compare degrees. Subtract the degree of the divisor from the degree of the dividend. For example, a degree-three polynomial divided by a degree-one polynomial should produce a degree-two quotient.
  2. Compare leading terms. Divide the dividend’s leading term by the divisor’s leading term. For example, 6x3 ÷ 2x = 3x2, so the first quotient term should be 3x2.
  3. Predict the remainder type. If the divisor is linear, the remainder should be a constant. If your final remainder still contains x, continue dividing or check your subtraction.
  4. Check by multiplication. Multiply the divisor by the quotient and add the remainder. The result should reproduce the original dividend.

This estimate is not a replacement for showing work. It is a quick control check that helps identify a misplaced exponent, incorrect sign, or missing quotient term.

Polynomial long division step by step

  1. Write both polynomials in descending order of powers.
  2. Insert zero terms for any missing powers.
  3. Divide the first term of the dividend by the first term of the divisor.
  4. Place that result above the matching power in the quotient.
  5. Multiply the entire divisor by the new quotient term.
  6. Subtract the product from the current dividend portion.
  7. Bring down the next term and repeat.
  8. Stop when the remainder’s degree is lower than the divisor’s degree.

Synthetic division step by step

  1. Confirm that the divisor has the form x - c.
  2. Write the dividend’s coefficients in descending-power order.
  3. Place c to the left of the coefficient row.
  4. Bring down the first coefficient.
  5. Multiply it by c, write the product under the next coefficient, and add.
  6. Repeat multiply-and-add across the row.
  7. The final number is the remainder; the preceding numbers are quotient coefficients.

Inputs and assumptions

Accurate polynomial division depends on a few simple inputs and conventions. Before beginning, use this checklist:

  • Order terms by descending exponent: write terms from the highest power to the constant term.
  • Fill missing powers with zero coefficients: for x3 + 5x - 2, use coefficients 1, 0, 5, -2.
  • Copy signs carefully: a divisor x + 4 supplies the synthetic value -4.
  • Keep the divisor unchanged: in long division, multiply every divisor term by each quotient term before subtracting.
  • Track the quotient degree: the quotient degree should equal dividend degree minus divisor degree when the dividend’s degree is at least as large.
  • Use exact values when possible: fractions are generally safer than rounded decimals during intermediate steps.

For a divisor of the form x - c, the Remainder Theorem states that the remainder equals f(c). Thus, dividing f(x) by x - 2 gives the same remainder as evaluating f(2). If f(2) = 0, then x - 2 is a factor.

This connection is useful when factoring polynomials. After finding a factor, synthetic division can reduce the polynomial and leave a quadratic or lower-degree expression to solve. For related equation-solving strategies, see the guide to quadratic equations.

Worked examples

Example 1: Long division with a zero remainder

Divide:

(2x3 + 3x2 - 11x - 6) ÷ (x - 2)

First divide the leading terms: 2x3 ÷ x = 2x2. Multiply:

2x2(x - 2) = 2x3 - 4x2

Subtract from the dividend portion:

(2x3 + 3x2) - (2x3 - 4x2) = 7x2

Bring down -11x. Next, 7x2 ÷ x = 7x. Multiplying and subtracting produces 3x. Then 3x ÷ x = 3; multiplying 3(x - 2) and subtracting the final terms leaves zero.

Therefore:

(2x3 + 3x2 - 11x - 6) ÷ (x - 2) = 2x2 + 7x + 3

Check: (x - 2)(2x2 + 7x + 3) = 2x3 + 3x2 - 11x - 6.

Example 2: Synthetic division

Divide x3 - 6x2 + 11x - 6 by x - 1. The synthetic value is 1, and the coefficients are 1, -6, 11, and -6.

The synthetic steps are:

Bring down 1 → multiply by 1 to get 1 → add to -6 to get -5 → multiply by 1 to get -5 → add to 11 to get 6 → multiply by 1 to get 6 → add to -6 to get 0.

The quotient is x2 - 5x + 6, with remainder 0. This quotient factors as (x - 2)(x - 3), so the original polynomial has factors (x - 1)(x - 2)(x - 3).

Example 3: A nonzero remainder

Divide 2x3 + 3x2 - 5x + 4 by x + 2. Use synthetic value -2. The coefficient process gives:

2, -1, -3, 10

Therefore, the quotient is 2x2 - x - 3, with remainder 10. In quotient-remainder form:

2x3 + 3x2 - 5x + 4 = (x + 2)(2x2 - x - 3) + 10

Since the remainder is not zero, x + 2 is not a factor. You can verify the remainder by evaluating the dividend at x = -2. For a broader error-checking routine, use this math answer-checking workflow.

Practice sets

Try these without looking at the answers first.

Set A: Linear divisors

  1. (x2 + 5x + 6) ÷ (x + 2)
  2. (3x3 - 4x2 + x + 7) ÷ (x - 1)
  3. (2x3 + x2 - 8x + 5) ÷ (x + 1)

Set B: Missing terms and quadratic divisors

  1. (x4 - 16) ÷ (x - 2)
  2. (2x4 + 3x2 - 5) ÷ (x2 + 1)
  3. (x3 + 4x - 9) ÷ (x2 - 1)

Set C: Repeated-factor practice

  1. Use synthetic division twice to divide x4 - 4x3 + 6x2 - 4x + 1 by (x - 1)2.
  2. Determine whether x + 2 is a repeated factor of x3 + 2x2 - 4x - 8.

Answer key: Set A: (1) x + 3, remainder 0; (2) 3x2 - x, remainder 7; (3) 2x2 - x - 7, remainder 12. Set B: (1) x3 + 2x2 + 4x + 8, remainder 0; (2) 2x2 + 1, remainder -3x - 6; (3) x + 1, remainder 5x - 8. Set C: (1) quotient 1, remainder 0; (2) x + 2 is a repeated factor because the first division also leaves a quotient divisible by x + 2.

When to recalculate

Recalculate whenever the dividend, divisor, or coefficient set changes. A new polynomial requires a new coefficient row; do not reuse a prior synthetic-division setup unless every coefficient is identical. Recheck immediately if you discover a missing term, change x - c to x + c, or switch from an exact fraction to a rounded decimal.

For homework or test preparation, revisit the method after each practice set and look for repeated error patterns: using the wrong synthetic value, skipping a zero coefficient, subtracting a negative term incorrectly, or reporting the final number as part of the quotient instead of the remainder. A calculator or graphing tool can help confirm a result by evaluating the original polynomial and the quotient-remainder expression, but it should support—not replace—the written setup.

Before submitting, use this five-step routine:

  1. Confirm the terms are in descending order.
  2. Check every missing power has a zero coefficient.
  3. Verify the divisor sign and synthetic value.
  4. Confirm the remainder degree is lower than the divisor degree.
  5. Multiply the divisor by the quotient and add the remainder.

With that routine, polynomial long division and synthetic division become dependable tools for factoring, checking roots, simplifying rational expressions, and solving higher-degree equations.

Related Topics

#algebra#polynomials#synthetic division#long division#remainders#precalculus
E

Equation Study Hub Editorial Team

Math Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.