Learn how to solve trigonometric equations in degrees and radians, list every solution in a specified interval, avoid calculator-mode mistakes, and verify your answers with the unit circle. The repeatable workflow below works for sine, cosine, tangent, and many equations that can be simplified into one of these forms.
Overview
A trigonometric equation contains a variable inside a trigonometric function, such as sin x, cos x, or tan x. Unlike a typical linear equation, a trig equation may have many solutions because these functions repeat.
For that reason, solving for one angle with an inverse function is only part of the job. You must also identify the other angles with the same sine, cosine, or tangent value, then keep only the solutions inside the requested interval.
A reliable solution has five stages:
- Simplify the equation and isolate the trigonometric function.
- Find a reference angle using the unit circle or an inverse function.
- Use the sign of the value to choose the correct quadrants.
- Apply the interval restriction and express answers in the requested units.
- Substitute each answer back into the original equation.
Before beginning, check whether the interval is written in degrees, such as 0° ≤ x ≤ 360°, or radians, such as 0 ≤ x ≤ 2π. Do not mix the two systems.
How to estimate
Here, “estimate” means finding an angle numerically when the exact unit-circle angle is not obvious. The process is still exact in structure: the calculator supplies a reference angle, while the unit circle supplies the complete set of solutions.
Step 1: Isolate the trig function
Use ordinary algebra first. For example:
3 sin x + 1 = 2
Subtract 1 and divide by 3:
sin x = 1/3
For an equation such as 2 cos x - 5 = 1, isolate cosine to get cos x = 3. Since cosine can only range from −1 to 1, this equation has no real solutions. A range check can save time before any calculator work.
Step 2: Find the reference angle
For a positive value of sine, cosine, or tangent, enter the value into the matching inverse function. For example:
α = sin−1(1/3)
The symbol sin−1 means inverse sine, not 1 divided by sine. Your calculator must be in the same mode as the problem. In degree mode, the result is measured in degrees; in radian mode, it is measured in radians.
Step 3: Use signs and quadrants
The reference angle α is always an acute positive angle. The sign of the original trig value determines where the solutions occur:
| Function | Positive in | Negative in | Period |
|---|---|---|---|
| Sine | Quadrants I and II | Quadrants III and IV | 2π or 360° |
| Cosine | Quadrants I and IV | Quadrants II and III | 2π or 360° |
| Tangent | Quadrants I and III | Quadrants II and IV | π or 180° |
A useful memory aid is “All Students Take Calculus”: all functions are positive in Quadrant I, sine in Quadrant II, tangent in Quadrant III, and cosine in Quadrant IV.
Step 4: Convert and restrict
If the answer is in the wrong unit, convert it before applying the interval:
- Degrees to radians: multiply by π/180.
- Radians to degrees: multiply by 180/π.
Then list only angles within the requested interval. Include an endpoint if the inequality includes it, as in 0 ≤ x ≤ 2π. Be alert for duplicate endpoint descriptions: 0 and 2π represent the same position on the unit circle, but both may be included if the interval explicitly includes both.
Inputs and assumptions
Before solving, write down the information that controls the answer:
- Equation: Identify whether it involves sine, cosine, tangent, or a factored or squared expression.
- Angle unit: Mark the problem as degrees or radians.
- Interval: Copy the lower and upper bounds exactly.
- Calculator mode: Confirm DEG or RAD before pressing an inverse-trig key.
- Required precision: Keep exact values such as π or √3/2 when appropriate; otherwise round only at the final step.
Standard unit-circle values are worth memorizing or keeping nearby:
| Angle | Radians | sin | cos | tan |
|---|---|---|---|---|
| 0° | 0 | 0 | 1 | 0 |
| 30° | π/6 | 1/2 | √3/2 | √3/3 |
| 45° | π/4 | √2/2 | √2/2 | 1 |
| 60° | π/3 | √3/2 | 1/2 | √3 |
| 90° | π/2 | 1 | 0 | undefined |
For angles outside Quadrant I, keep the reference value and change signs according to the quadrant. This is usually faster and less error-prone than trying to memorize every angle separately.
Worked examples
Example 1: Sine in degrees
Solve sin x = 1/2 for 0° ≤ x ≤ 360°.
- The reference angle is 30° because sin 30° = 1/2.
- Sine is positive in Quadrants I and II.
- The Quadrant I solution is x = 30°.
- The Quadrant II solution is x = 180° − 30° = 150°.
Answer: x = 30°, 150°. Verification: both angles have a sine value of 1/2.
Example 2: Cosine in radians
Solve cos x = −√2/2 for 0 ≤ x ≤ 2π.
- The reference angle is π/4.
- Cosine is negative in Quadrants II and III.
- Quadrant II gives x = π − π/4 = 3π/4.
- Quadrant III gives x = π + π/4 = 5π/4.
Answer: x = 3π/4, 5π/4.
Example 3: Tangent with a calculator
Solve tan x = 2 for 0 ≤ x ≤ 2π.
- Find the reference angle: α = tan−1(2), approximately 1.107 radians.
- Tangent is positive in Quadrants I and III.
- The first solution is approximately 1.107.
- Because tangent repeats every π, the second solution is 1.107 + π ≈ 4.249.
Answer: x ≈ 1.107, 4.249. Keep the same rounding precision for both values and substitute them into the original tangent equation to check.
Example 4: Factoring a trig equation
Solve 2 sin2x − sin x = 0 for 0 ≤ x ≤ 2π.
Factor first:
sin x(2 sin x − 1) = 0
So either sin x = 0 or sin x = 1/2. On the interval, the first condition gives x = 0, π, 2π. The second gives x = π/6, 5π/6.
Answer: x = 0, π/6, 5π/6, π, 2π. This example shows why factoring and solving each branch matters; solving only one resulting equation would miss solutions.
When to recalculate
Revisit your work whenever the interval, angle unit, rounding requirement, or equation changes. Recheck calculator mode at the start of every new problem set, especially after switching between degree-based and radian-based questions.
Use this printable interval-and-quadrant checklist:
- What are the lower and upper interval bounds?
- Are the bounds in degrees or radians?
- Did I isolate the trig function completely?
- What is the positive reference angle?
- Which quadrants match the sign?
- Did I include every solution in the interval?
- Did I avoid duplicate or out-of-range answers?
- Did I verify each answer in the original equation?
If your answer count seems too small, check the period and quadrants before assuming the calculator is wrong. If your answers look plausible but do not substitute correctly, check whether the calculator was in the wrong mode or whether a rounded reference angle was used too early. For a broader error-finding routine, see How to Check Your Math Answers. When a trig equation is written as a function of an input, the function notation guide can also help clarify substitution.
For practice, create a new set by changing one input at a time: keep the equation but change the interval, switch from degrees to radians, or change the sign of the trig value. Solving those variations builds the habit that matters most in test prep: identifying the complete solution set rather than stopping at the first calculator result.